OSHA regulations forced me to do this, obviously...
(Unfortunately the formatting gets screwed up, so this doesn't look quite right. Blame FF :) )
Brockton Bay Family Operations, LLC
Date of issue: 04/01/2011 Revision Date: 04/01/2011 Version: 1.0a
MATERIAL SAFETY DATA SHEET
SECTION 1: Identification
1.1. Identification
Product form: Substance
Substance name: Stabilized Electron Degenerate Matter
CAS #: 3141592-666-01
Product code: FT00001
Formula: Not applicable
Synonyms: EDM, SEDM, SaurialSteel®
1.2. Relevant identified uses of the substance or mixture and uses advised against
Use of the substance : Industrial, scientific, and medical
Recommended use : Tools, construction, medical implants
Restrictions on use: Not a food product. Can cause crush and cut injuries if mishandled
1.3. Details of the supplier of the safety data sheet
BBFO, LLC
Building 12D East, Access Road #2,
Brockton Bay Dockworkers Union,
1337 Marine Way, Brockton Bay, MA 01952
T: (555) 3537 4824
E: sales
1.4. Emergency Telephone Number
Emergency Number: BBFO: (555) 3825 4357
SECTION 2: Hazard(s) Identification
2.1. Classification of the substance or mixture
GHS-US classification: Not classified
2.2. Label Elements
Not classified as a hazardous chemical
2.3. Other hazards
None
2.4. Unknown acute toxicity (GHS-US)
Not applicable
SECTION 3: Composition/Information on ingredients
3.1. Substances
Substance type: Mono-constituent
Name: Electron Degenerate Matter (stabilized)
Product identifier : 3141592-666-01
Percentage: 100
GHS-US classification: Not classified
Full text of hazard classes and H-statements: see section 16
3.2. Mixtures
Not applicable
SECTION 4: First aid measures
4.1. Description of first aid measures
First-aid measures general: If you feel unwell, seek medical advice (show the label where possible)
First-aid measures after inhalation: Allow victim to breathe fresh air. Allow the victim to rest. Adverse effects not expected from this product.
First-aid measures after skin contact: Application velocity and physical form dependent. Seek medical advice if trauma suffered.
First-aid measures after eye contact: Remove from eye. Seek medical advice if trauma suffered.
First-aid measures after ingestion: Wait. Minor discomfort may occur in six to 12 hours. Long term adverse effects not expected from this product.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms/injuries: Not expected to present a significant hazard to user under anticipated conditions of normal use. Hazards to surroundings and bystanders dependent on use scenario.
4.3. Indication of any immediate medical attention and special treatment needed
Treat symptomatically. Parahuman healing suggested for extreme or high energy interactions with product.
SECTION 5: Firefighting measures
4.1. Extinguishing media
Suitable extinguishing media : Not applicable. Product totally noncombustible.
4.2. Special hazards arising from the substance or mixture
Thermal superconductor.
4.3. Advice for firefighters
Firefighting instructions: Burn hazard if any part of product exposed to dangerous temperatures. Remove from fire and allow to cool. Use suitable handling equipment rated for temperatures encountered.
Protection during firefighting: Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Product density high to extreme. Crush hazard, wear protective footwear. Product can form subatomically sharp edges. Do not allow anything to come into contact with such edges. No protective equipment not manufactured from product suitable for use when handling product with subatomic edges.
6.2. Environmental precautions
Product totally inert. No special precautions required for low density form.
High density form will sink into ground due to extreme mass. Risk of minor localized earth tremors, planetary annihilation, extinction-level event. Notify authorities if quantities 10cm3 enters environment.
6.3. Methods and material for containment and cleaning up
Low density form: Pick up.
High density form: Fill cavity in ground, contact authorities and BBFO, LLC.
6.4. Reference to other sections
See section 8, Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling: Do not touch sharp edges. Do not drop on foot. Virtually frictionless surface, may present slip hazard.
7.2. Conditions for safe storage
Storage conditions: Store out of reach of children.
Incompatible products: None
Incompatible materials: None
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
No additional information available
8.2. Exposure controls
Appropriate engineering controls: Provide adequate general ventilation
Personal protective equipment: Gloves. Armored footwear.
Hand protection: EDM mesh gloves if handling sharp edges
Eye protection: Do not insert into eye
Respiratory protection: None necessary
Other information : Do not touch sharp edges without suitable protection. Do not apply internally without medical advice. Do not allow high mass of product to fall on personnel. Do not allow to fall to center of planet.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state: Solid
Color: Metallic gray
Odor: None
pH: None
Melting point : Not applicable under non-stellar conditions
Freezing point: No data available
Boiling point: None
Flash point: None
Relative evaporation rate (butyl acetate=1): 0
Flammability: Non flammable
Vapor pressure: 0.00 mmHg
Vapor pressure 50 °C: 0.00 mmHg
Relative density: 71.6 (low mass)
: 100293423.2 (high mass)
Molecular mass: Not generally applicable
Solubility: Insoluble in any solvent
Decomposition temperature: No data available
Young's modulus: ∞
Explosive properties: None
Oxidizing properties: None
Reducing properties: None
9.2. Other information
No additional information available
SECTION 10: Stability and reactivity
10.1. Reactivity
Non reactive
10.2. Chemical stability
Unconditionally stable
10.3. Possibility of hazardous reactions
None
10.4. Conditions to avoid
None
10.5. Incompatible materials
None
10.6. Hazardous decomposition products
None
SECTION 11: Toxicological information
11.1. Information on toxicological effects
Likely routes of exposure: Skin and eye contact
Acute toxicity: Not classified
LD50 oral rat1000000 mg/kg
ATE US (oral)1000000.000 mg/kg body weight
Skin corrosion/irritation: Not classified
Serious eye damage/irritation: Not classified
Respiratory or skin sensitization: Not classified
Germ cell mutagenicity: Not classified
Carcinogenicity: Not classified
(Based on available data, the classification criteria are not met)
Reproductive toxicity : Not classified
Specific target organ toxicity
Single exposure: Not classified
Repeated exposure: Not classified
Aspiration hazard : Not classified
Potential Adverse human health
effects and symptoms : Totally chemically inert. Biocompatibility level 7, Panacea standard code.
SECTION 12: Ecological information
12.1. Toxicity
No additional information available.
12.2. Persistence and degradability
Persistence : Variable up to ∞ and beyond
Degradability: None
12.3. Bioaccumulative potential
None
12.4. Mobility in soil
Vertical
12.5. Other adverse affects
No other effects known.
SECTION 13: Disposal considerations
13.1. Disposal methods
Contact manufacturers for disposal. No other methods possible.
SECTION 14: Transport information
Department of Transportation.
In accordance with DOT
Not regulated
SECTION 15: Regulatory information
15.1. US Federal regulations
Electron Degenerate Matter (3141592-666-01)
Listed on the United States TiSCA (Tinker Substances Control Act) inventory
All components of this product are listed, or excluded from listing, on the United States Environmental Protection Agency Tinker Substances Control Act (TiSCA) inventory
This product or mixture does not contain a toxic chemical or chemicals in excess of the applicable de minimis concentration as specified in 40 CFR §372.38(a) subject to the reporting requirements of section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
15.2. International regulations
CANADA
Electron Degenerate Matter (3141592-666-01)
WHMIS Classification Uncontrolled product according to WHMIS classification criteria
EU Regulations
No additional information available
National regulations
No additional information available
Cross-Universal regulations
No additional information available
15.3. US State regulations
California Proposition 65 – This product does not contain any substances known to the state of California to cause cancer, developmental and/or reproductive harm
SECTION 16: Other information
Revision date: 04/01/2011
Other information: None.
NFPA health hazard: 0 - Materials that, under emergency conditions, would offer no hazard beyond that of ordinary combustible materials.
NFPA fire hazard: 0 – Materials that will not burn under typical dire conditions, including intrinsically noncombustible materials such as concrete, stone, and sand.
NFPA reactivity: 0 - Material that in themselves are normally stable, even under fire conditions.
HMIS III Rating
Health: 0 Minimal Hazard – No significant risk to health
Flammability: 0 Minimal Hazard – Materials that will not burn
Physical: 0 Minimal Hazard – Materials that are normally stable, even under fire conditions, and will NOT react with water, polymerize, decompose, condense, or self-react. Non-Explosives.
Personal protection: A
SDS US BBFO, LLC
Information in this SDS is from available published sources and is believed to be accurate. No warranty, express or implied, is made and BBFO, LLC assumes no liability resulting from the use of this SDS. The user must determine suitability of this information for their application.